VALPRO 50″ REFRIGERATED CHEF BASE
Valpro presents the VPCB-50 Chef Base
Valpro chef bases provide a two-in-one design featuring a rugged construction worktop equipment stand and convenient refrigerated draws below. Our heavy-duty stainless steel top with full perimeter marine edge has an internal ceramic fabric heat shield layer over foam for enhanced interior cabinet insulation. Our all stainless steel full extension draws have heavy duty telescopic cartridge system and accept various pan configurations without the need for a rail system due to their full draw design with draw bottom. Our chef base will provide many years of worry free service and deliver cost saving eco-friendly energy efficiency utilizing natural R290 hydrocarbon refrigerant. All Valpro products are manufactured under strict ISO9001 standards for quality assurance, and to consistently deliver to our customers products that satisfy all expectations. All our products are operated, extensively monitored, and undergo rigorous inspection prior to packaging and shipping.
Features
Thick-gauge stainless steel construction (top, front, sides, and framework)
304 Stainless steel floor with aluminum interior walls
Complete draws with draw bottoms accommodate pans (not included) without requiring a rail system
Raised marine edge cabinet top, 1” perimeter, contains spills while providing a flat stable surface
High density foamed in-place CFC and HCFC free polyurethane insulation
Snap-in magnetic door gaskets removable and replaceable without tools for ease of cleaning
High efficiency anti-corrosion coated evaporator
Front accessible condensing unit for easy cleaning
Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption
Front mounted electronic thermostat digitally controlled temperature system maintains optimum temperature with
Auto defrost and auto evaporation of condensation water
Four 4” casters (front locking) make it easy to maneuver and clean underneath
Energy verified and ETL sanitary certified to NSF Standard 7
2 Year Parts & Labor Warranty / 5 Year Compressor Part Warranty
PDF Downloads
Product Spec Sheet
Operators Instruction Manual
Dimensional Drawing
Parts Diagram
Product Specs:
Dimensional Data
| Exterior Dimensions | 50”W x 31.9”D x 26”H |
|---|---|
| Top – Flat Surface Area | 48”W x 29.9”D |
| Draw Dimensions (ea.) | 25.8”W x 25.8”D x 4.1” |
| Net Storage Capacity | 6.5 Cu Ft (184 L) |
| Crate Weight | 250 lbs. |
| Shipping Dimensions | 51.2”W x 32.9”D x 27.8”H |
Refrigeration Data
| Temperature Range | 33°F – 41°F |
|---|---|
| Refrigerant | R290 |
| Refrigerating System | Capillary Tube |
| Temperature Controller | Digital |
| Horsepower | 1/3 |
Construction Data
| Exterior Material | 430 Series Stainless Steel |
|---|---|
| Interior Floor Material | 304 Series Stainless Steel |
| Interior Wall Material | Aluminum |
| Insulation | Foamed in Place Polyurethane |
| Shelves | 2 Heavy Duty Epoxy Coated |
Electrical Data
| Amps | 2.1 |
|---|---|
| Voltage / Frequency / Phase | 115V/60Hz/1 |
| Plug Type | NEMA 5-15P |
| Electrical Cord Length | 8 ft. |
Due to continued product development and improvements, specifications are subject to change without notice. This equipment is designed and intended for commercial indoor use.

